Germany Techtextil 2024 | April 23-26, eSUN cordially invites everyone to gather in Frankfurt!
Updatetime：2024-04-18
Share:
From April 23rd to 26th, the Techtextil 2024 Frankfurt Nonwovens and Technical Textiles Exhibition will be held at the Frankfurt Exhibition Centre in Germany.
As the world's leading exhibition for textiles and nonwovens, Techtextil 2024 will attract exhibitors from all over the globe, showcasing a complete range of products in technical textiles, nonwovens, functional apparel textiles, and textile technologies.
eSUN will bring PLA fibers,non-woven products, and various application cases to booth F41E in Hall 9.1; welcome to visit!
PLA is a biodegradable material with broad application prospects. It is a synthetic, biodegradable thermoplastic aliphatic polyester polymer primarily derived from renewable plant resources such as corn, cassava, sugarcane, and plant straw. Lactic acid is obtained through microbial fermentation and purification, followed by chemical synthesis to create PLA. The biodegradability of PLA allows it to be entirely decomposed by natural microorganisms after use, ultimately turning into carbon dioxide and water without polluting the environment, making it an eco-friendly material.
PLA's biobased origin is sustainable, with excellent biocompatibility and biodegradability, making it the optimal choice to replace traditional plastics.
Polylactic acid fiber and its nonwoven fabric combine the advantages of natural fibers and synthetic fibers, possessing a weak acidity similar to human skin, naturally skin-friendly, antibacterial, anti-mite, anti-allergic, with good moisture permeability, smoothness, breathability, and lustrous appearance. Additionally, textile products made from polylactic acid fiber have the characteristic of being self-extinguishing, ensuring high safety in use. Polylactic acid fiber and nonwoven fabric are increasingly gaining attention and favor.
Introduction of eSUNFiber's Products
（1）Raw Material Category
| Product Name | Specification | Specification |
| Fiber grade polylactic acid 1 | eSunAI6001 | Suitable for yarn |
| Fiber grade polylactic acid 2 | eSunAI6002 | Suitable for staple fiber, non-woven fabric, etc. |
（2）Polylactic acid fiber category
| Product Name | Specification | Application |
| Polylactic acid staple fiber | Fineness：0.9-6D Length：3/6/12mm | Wet papermaking, flocking, etc. |
| Polylactic acid single-component staple fiber | Fineness：1-6D Length：6-64mm | Yarn, non-woven fabric, etc. |
| Polylactic acid dual-component staple fiber | Fineness：1.5-5D Length：6-64mm | Non-woven fabric, thermal bonding, filler, etc. |
| Polylactic acid three-dimensional crimped staple fiber | Fineness：1.5-5D Length：38/51/64mm | Filling for clothing, home textiles and toys, etc. |
| Polylactic acid yarn | DTY elastic filament, FDY fully drawn yarn, PLA monofilament | Fabric making, silk bundle, tea bag, etc. |
（3）Polylactic acid non-woven fabric category
| Product Name | Product Name | Application |
| Thermal bonded non-woven fabric | Weight：20gsm-200gsm Width：7cm-220cm | Diaper sanitary napkin top layer bottom layer/mask wall cloth/product packaging, etc. |
| Hot air non-woven fabric Weight | Weight：20gsm-45gsm Width：7cm-130cm | Diaper sanitary napkin top layer/hot air cotton, etc. |
| Spunlace non-woven fabric | Weight：20gsm-100gsm Width：7cm-220cm | Diaper sanitary napkin top layer/makeup remover cotton/wet wipes/facial mask cloth, etc. |
| Needle punched non-woven fabric | Weight：60gsm-800gsm Width：20cm-320cm | Clothing/suede fabric/ wall cloth/ carpet/ filter core, etc. |
| Spunbond non-woven fabric | Weight：15gsm-150gsm Width：20cm-320cm | Mask/tea bag/ sand barrier/ protective clothing/ shopping bag/ geotextile, etc. |
| Meltblown non-woven fabric | Weight：15gsm-45gsm Width：12cm-160cm | Mask filter layer/air purification cotton, etc. |
Lactic acid fiber and its non-woven fabric can be widely used in sanitary materials, clothing fabrics, home textiles, toy stuffing, and medical supplies.
Introduction to eSUNFiber
Currently,eSUNFiber has one 10,000 tons/year melt-spun polylactic acid fiber production line, one 1,000 tons/year polylactic acid hot air non-woven fabric production line, and three functional polylactic acid fiber production lines. Among them, the three functional polylactic acid fiber production lines have an annual capacity of 5,000 tons and can produce various differentiated products such as three-dimensional curled fibers, dual-component PLA fibers, profiled fiber, polylactic acid yarn, and solution-dyed polylactic acid fibers.
eSUNFiber's polylactic acid fiber and non-woven fabric have successfully passed the compost degradation testing certification by DIN CERTCO (German Institute for Standardization). Regarding product safety, eSUNFiber's polylactic acid non-woven fabric has passed skin sensitization tests, ensuring the product's safety performance. Additionally, through professional testing, eSUNFiber's polylactic acid fiber has demonstrated effective antibacterial properties.
Polylactic acid fibers and nonwoven products feature "bio-based, recyclable, and degradable" characteristics, which drive the development of the polylactic acid fiber nonwoven business. This contributes to enhancing the eco-friendliness of the final products, building a "green cycle" economy, and promoting the achievement of global carbon reduction goals and sustainable development.
During the exhibition, we welcome friends to visit us at the eSUN booth!
Exhibition Information:
Exhibition Name: Techtextil—International Trade Fair for Technical Textiles and Nonwovens
Exhibition Dates: April 23 to April 26, 2024
Exhibition Location: Frankfurt Exhibition Centre, Germany
eSUN Booth Number: Hall 9.1, F41E
EsunFiber (Suzhou) Co., Ltd. is at your service!
Message customization
